>Sub Menu-but

Infant / Pediatric ventilator
 



형명: SECHRIST Model Ⅳ-200

The Sechrist IV-200 Infant/Pediatric
Ventilator is a pressure-limited, time cycled, continuous flow ventilator.
Manual breaths and CPAP is also available.
The Sechrist IV-200 control circuitry can be operated with 100-240 volts AC, 50/60 Hz.
It can also be operated from a 12 volt DC power supply using the accessory power cable provided. This ventilator requires pneumatic power and operates on external compressed air and oxygen sources from 30-60 psi.
The gas mixing blender and flowmeter are enclosed within the ventilator housing.

The Sechrist IV-200 ventilator is capable of meeting the most demanding requirements
of the NICU or PICU around the world.
The built-in displays provide easy-to-read continuous ventilation parameter information.

The alarm package and modes of ventilation including CPAP are similar to the IV100B infant ventilator system.
This ventilator can adequately ventilate newborns to pediatric patients
with precise control of oxygen concentration,
at respiratory rates from 1 to 150 BPM. To prevent inadvertent PEEP when higher flow rates are used, a special pediatric exhalation valve block and pediatric circuit are available.

Ventilation Application   Neonatal
    Pediatric
CONTROLS    
Modes of Ventilation   OFF
    CPAP
    VENT (IMV,CMV)
Flow   0 to 32 LPM; Flush 40 LPM
Oxygen Percent   21% to 100%
Inspiratory Time   0.10 to 2.90 sec.
Expiratory Time   0.30 to 60.0 sec.
Manual Breath    
Inspiratory Pressure   5 to 70 cm H2O
Expiratory Pressure   -2 to 20 cm H2O
Test   Checks microprossor function, displays and alarm function
    Waveform Control
    Allows the user to vary the proximal airway pressure waveform
Time Preset   While in the CPAP mode, this feature allows the user to preview and select the desired Inspiratory and Expiratory Times before switching to the VENT mode.
Safety Pressure Relief Valve (Adjustable)   15 to 85 cm H2O
ALARM CONTROLS    
Delay Time   3 to 60 sec.
    Sets the time delay before the LO pressure alarm is audibly and visually activated.
Alarm Mute   30 ± 5 sec.
Alarm Set Arrows   High Inspiratory Pressure Alarm Limit
    Low Inspiratory Pressure Alarm Limit
Select (Reset) Button   Allows the user to select either the LO or HI pressure alarm limit setting. This button is also used to cancel the HI limit alarm when it is activated.
Alarms   High (HI) Pressure Limit
    Peak Overpressure
    Low (LO) Pressure Limit
    Low Airway Pressure
    Leaks
    Patient Disconnect
    Fail-to-Cycle
    Apnea
    Prolonged Inspiration
    Source Gas Failure
    Power Failure (Battery Backup)
Displays   Inspiratory Time
    Expiratory Time
    I:E Ratio
    Rate
    Airway Pressure (to 80 cm H2O)
    High Pressure Alarm
    Low Pressure Alarm
    Mean Airway Pressure
Indictators   Inspiratory Phase
    Inverse I:E Ratio
    Mode Selection
    Alarm
    High and Low Pressure Alarm
    Limit Set Points
Pre-set   Safety Auto Lock-Out Circuit (Inspiratory Phase terminated at 4 sec. Even if microprossor fails
Pneumatic Requirements   Medical Grade Air and Oxygen: 30 to 60 psi; differential within 20 psi.
Electrical Requirements   117 VAC 50/60 Hz
    Overseas voltage requirements available)
    Circuit Breaker Protected
    D.C. Power Requirements
    12 VDC 1.2 amps
Physical Specifications    
Dimensions   Height: 16.25 in (41.27 cm)
    Width: 12 in (30.48 cm)
    Depth: 9.5 in (24.13 cm)
Weights   Net: 27 lbs. (12.2 Kg)
    Shipping: 35 lbs. (15.9 Kg)
Miscellaneous Specifications   3-Wire SJT Power Cord
    Hospital-Grade Plug, current leakage less than 20 microamps when tested per UL 544
    Auxiliary Flowmeter Port
    *Specifications subject to change without notice
     
Product   Part No.
Ventilator, IV200, 117v English Language   20208
Ventilator, IV200, 117v Spanish Language   20219
Ventilator, IV200, 220v English Language   20209
Ventilator, IV200, 220v Spanish Language   20220